Furse

ESP M2/M4 Series

SKU : ESP M2/M4 Series

Combined Type 1, 2 and 3 tested protector (to BS EN 61643) for use on the main distribution board directly feeding electronic equipment such as computers, communication and control equipment, particularly where a structural Lightning Protection System (LPS) is employed. For use at boundaries up to LPZ 0 to protect against flashover (typically the main distribution board location) through to LPZ 3 to protect sensitive electronic equipment.

ติดต่อเรา
รายการโปรด
ESP D1 Series (Single phase)

SKU : ESP D1 Series (Single phase)

Combined Type 1, 2 and 3 tested protector (to BS EN 61643) for use on single phase mains power distribution systems primarily to protect connected electronic equipment from transient overvoltages on the mains supply, e.g. computer, communications or control equipment. For use at boundaries up to LPZ 0 to protect against flashover (typically the main distribution board location, with multiple metallic services entering) through to LPZ 3 to protect sensitive electronic equipment.

ติดต่อเรา
รายการโปรด
ESP D1 Series (Three phase)

SKU : ESP D1 Series (Three phase)

Combined Type 1, 2 and 3 tested protector (to BS EN 61643) for use on three phase mains power distribution systems primarily to protect connected electronic equipment from transient overvoltages on the mains supply, e.g. computer, communications or control equipment. Innovative remote display options allow both protector and display to be mounted in their optimum position. For use at boundaries up to LPZ 0 to protect against flashover (typically the main distribution board location, with multiple metallic services entering) through to LPZ 3 to protect sensitive electronic equipment

ติดต่อเรา
รายการโปรด
ESP 415DT1/12.5 Series (Three phase)

SKU : ESP 415DT1/12.5 Series (Three phase)

Features & benefits • Very low let-through voltage (enhanced protection to IEC/ BS EN 62305) between phase and neutral conductors, where sensitive equipment is connected • Full Mode design capable of handling partial lightning currents as well as allowing continual operation of protected equipment • Repeated protection in lightning intense environments • Innovative multiple thermal disconnect technology for safe disconnection from faulty or abnormal supplies (without compromising protective performance) • Three way visual indication of protection status and advanced pre-failure warning so you need never be unprotected

ติดต่อเรา
รายการโปรด
ESP 240T1 Surge Protection Series

SKU : ESP 240T1 Surge Protection Series

Features & benefits • Enhanced protection (to IEC/BS EN 62305) offering low let-through voltage further minimizing the risk of flashover creating dangerous sparking or electric shock • Repeated protection in lightning intense environments • Pluggable module design (with anti-vibration locking clip) allows for simple replacement at end-of-life • Compact, space saving design • Indicator shows when the SPD protection modules requires replacement • Remote signal contact can indicate the protector’s status through interfacing with a building management system

ติดต่อเรา
รายการโปรด
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว และ นโยบายคุกกี้
เปรียบเทียบสินค้า
0/4
ลบทั้งหมด
เปรียบเทียบ
Powered By MakeWebEasy Logo MakeWebEasy